Development and manufacturing of telecommunication equipment

2G/3G/4G terminal WB-11P

Overview
Specifications
Reviews

Key benefit
  • Supporting up to 2 x 2G/3G/LTE modules with redundancy/aggregation of 2G/3G/LTE channels
  • Outdoor IP-67 case, operating temperature from -40 °С to +40 °С
  • TR-069/DHCP-based autoprovisioning
  • Power supply over the PoE technology
Brief description
WB-11P is a high-performance bi-channel 2G/3G/4G terminal for connecting network equipment to the Internet or private/corporate networks providing channels aggregation/redundancy. The hermetic package of device (IP-67) enables the terminals exploitation in challenging weather conditions. There is a possibility of connection of 1 or 2 2G/3G/LTE modules. Redundancy and aggregation of uplink interfaces are carried out when simultaneous using of two 2G/3G/LTE modules. Only external omni antennas are provided. There is an Ethernet 10/100/1000Base-T slot to connect to the client’s local network. The power supply is provided by the PoE technology.

Device status
Engineering samples are in the beta testing phase.

Should you have any questions relating to the device testing or others, please contact the ELTEX commercial department: eltex@eltex-co.ru.

Interfaces
  • 1 Ethernet port of 10/100/1000Base-T
  • 2 interfaces of 2G/3G/LTE with aggregation or redundancy support
Wireless connection standards
  • LTE/4GFDDBands: B3, B7, B20
  • DC-HSPA+/UMTS/3G: B1, B8 (900)
  • UMTS/3G: B1, B8 (900)
  • GSM/2G: 900, 1800
Connection types
  • Static IP address
  • DHCP
  • PPPoE
  • GRE
Network functions
  • NAT
  • Static and Dynamic routing
  • VLAN support (VLAN PerService model)
  • DHCP, DNS servers on the LAN side
  • Port forwarding
  • Router/bridge mode operation
  • Firewall
  • Multiservice model: separate network settings configuration per service (Internet, Management)
  • «2G/3G/4G router» mode
  • Traffic shaping  of wired connection (via Ethernet port)
  • MAC-based filtering on a wired interface
Management
  • WEB (RU, EN)
  • CLI
  • Telnet
  • SSH
  • TR-069 (working with Eltex ACS server is recommended)
  • DHCP-autoprovisioning
  • Isolated GRE interface for management (VRF)
Diagnostics
  • Monitoring of device status via WEB interface
  • Debug information output to WEB, Syslog, Telnet
  • Interacting with the wiSLA platform
Main technical features
  • Realtek processor 1000 MHz
  • SDRAM 128 Mb
  • SPIFlash 32 Mb
  • OSLinux
  • Reset button
Physical features
  • Power supply: PoE (20W max. Class 4)
  • Operating temperature: from -40 °С to +40 °С
  • Operating humidity: up to 80%
  • Dimensions: 220x260x48 mm (the antenna dimensions are not considered)